美国将豁免110种中国进口商品高额关税(附清单) ！并部分解禁对华为供货！

序号

税号

产品说明

1

8402.90.0010

Heat exchangers, the foregoing comprising   parts of goods of heading 8402 and each fitted for heat recovery steam   generator

2

8402.90.0090

Drums, exhaust stacks, and inlet duct panel   assemblies of heat recovery steam generators

3

8402.90.0090

Water tanks for steam or other vapor   generating boilers

4

8408.90.9010

Compression-ignition engines with maximum   power exceeding 50 kW but not exceeding 120 kW, each valued over $6,000 but   not over $9,500 per unit

5

8408.90.9020

Compression-ignition engines, exceeding   149.2 kW but not exceeding 373 kW and valued over $9,800 but not over $12,000

6

8411.99.9090

Aircraft gas turbine compressor cases of   steel and Inconel alloy, each valued over $3,000 but not over $4,000

7

8411.99.9090

Engine stationary seal air supports of   Inconel alloy, each measuring over 35 cm but not over 35.5 cm in outer   diameter and over 3.5 cm but not over 4 cm in width

8

8412.39.0080

Direct acting and spring return pneumatic   actuators, each rated at a maximum pressure of 10 bar and valued over $68 but   not over $72 per unit

9

8412.80.1000

Spring-operated motors, each valued over   $3,000 but not over $3,600

10

8413.60.0030

Gear-type hydraulic fluid power pumps,   handheld, battery powered, the foregoing not over 5 cm in width and valued   not over $6 per unit

11

8413.70.2015

Centrifugal water pumps incorporating   thermal cut-offs, each with discharge outlet 5.08 cm or more in diameter,   valued over $66 but not over $72 per unit

12

8413.91.9010

Motor vehicle oil pump housings

13

8413.91.9095

Impellers

14

8413.91.9095

Parts of oil and gas extraction beam pumps,   other than hydraulic power pumps

15

8413.91.9095

Pedestals of pump assemblies

16

8413.91.9095

Pump bases, of plastic, designed to protect   the pump impellers from obstructions

17

8413.91.9095

Pump casings and bodies

18

8413.91.9095

Pump covers

19

8413.91.9095

Pump expellers

20

8413.91.9095

Pump grease cups and grease cup adapters

21

8413.91.9095

Pump liners

22

8413.91.9095

Pump manifolds

23

8413.91.9095

Pump parts, of plastics, each valued not   over $3

24

8413.91.9095

Pump shaft castings, of steel

25

8413.91.9095

Pump throatbushes

26

8413.91.9095

Pump volutes

27

8413.91.9095

Structural pump bases, of stainless steel

28

8414.30.8030

Compressors, other than screw type, used in   air conditioning equipment in motor vehicles, each valued over $88 but not   over $92 per unit

29

8414.30.8050

Compressors, other than screw type, of a   kind used in household refrigerators, air conditioners and heat pumps, rated   at more than 1⁄4 horsepower but not more than 1   horsepower, each valued not over $150

30

8427.20.8090

Fork-lift trucks, propane gas powered,   having a rated lift capacity over 9.5 metric tons but not exceeding 33 metric   tons

31

8429.20.0000

Motor grader weighing more than 14 metric   tons but not over 21 metric tons

32

8429.40.0040

Self-propelled pneumatic compactors, each   weighing over 14 metric tons but not over 28 metric tons

33

8429.51.1015

New articulated shovel loaders, wheeled,   each with 4-wheel drive, rear mounted engine and a bucket capacity of under   1.5 m3, rated at not over 26 horsepower

34

8429.51.1040

Integrated tractor shovel loaders, each   with 4 wheel drive, a bucket capacity of at least 3.8 m3 but less than 5.2   m3   and an operating weight of 17.5 metric   tons or more but not over 20 metric tons

35

8429.51.1045

Shovel loaders with an operating weight of   from 30 metric tons to 36 metric tons

36

8429.51.1050

Shovel loaders with an operating weight of   from 30 metric tons to 36 metric tons

37

8429.51.5010

Rubber track shovel loaders having a lift   capacity not over 375 kg

38

8431.10.0010

Grooved wire rope drum valued over $350

39

8431.31.0040

Escalator drive assemblies consisting of a   motor, planetary gear and gearbox

40

8431.31.0040

Escalator steps

41

8431.31.0060

Parts of passenger or freight elevators   consisting of any of the following: Elevator emergency brake and speed   governor apparatus, scissor lift assemblies, telescoping boom lift assemblies   or articulating boom lift assemblies

42

8431.39.0070

Counterweights for log handling equipment

43

8431.49.9044

Backhoe counterweights each weighing more   than 400 kg but not more than 600 kg

44

8431.49.9044

Excavator crawler shoes

45

8432.90.0060

Seeder or spreader baffle and baffle   assemblies

46

8432.90.0060

Seeder or spreader frames

47

8432.90.0060

Seeder or spreader handles

48

8432.90.0060

Seeder or spreader hopperassemblies

49

8432.90.0060

Seeder or spreader hopper grates

50

8432.90.0060

Seeder or spreader impellers

51

8436.80.0090

Chipper/shredder machines,electrically   powered

52

8436.80.0090

Chipper/shredder machines,gasoline powered,   valued less than $250 per unit

53

8436.80.0090

Malt production equipment

54

8458.19.0020

Horizontal lathes, electrically powered not   over 1.5 horsepower

55

8474.90.0010

Feeder and vibratory flow equipment and   parts thereof designed for use in screening or sorting machines; housings and   noise reduction enclosures;

56

8479.30.0000

Press machines for bamboo or other   materials of a woody nature

57

8479.81.0000

Electric wire coil-winder machines

58

8479.82.0040

Insulated mixing chambers of stainless   steel, each having a capacity of 5 m3 to 25 cubic meters

59

8481.30.2090

Check valves of steel having an internal   diameter not less than 4.8 cm or exceeding 62.5 cm

60

8481.90.9060

Bodies of pressure-reducing valves other   than hand-operated or check valves and valves classified in 8481.20, such   bodies of brass

61

8481.90.9060

Bodies of valves other than hand-operated   or check valves and valves classified in 8481.20, such bodies measuring over   18 cm but not exceeding 19 cm in length, valued over $55 but not over $65 per   unit

62

8482.10.5016

Flanged wheel hub bearing units with ball   bearings, each having an inner diameter exceeding 2.2 cm but not exceeding   2.8 cm

63

8482.10.5024

Wheel hub angular contact bearing units,   not flanged, valued over $2 but not over $10 per unit

64

8482.99.0500

Inner bearing rings

65

8483.40.9000

Non-toothed gears for office printers, each   valued not over $7

66

8483.50.9080

Non-grooved pulleys, each incorporating a   deep groove roller bearing

67

8483.50.9080

Non-grooved pulleys, zinc plated, each   valued not over $3

68

8483.90.8080

Hubs for conveyor pulleys with an outside   diameter of more than 5 cm but not more than 56 cm

69

8487.90.0080

Handles for machinery

70

8501.10.4060

Electric motors of a width exceeding 7.5 cm   but not exceeding 7.8 cm

71

8501.31.2000

DC motors, each valued over $125, with   attached stranded copper cord

72

8501.53.4080

AC motors, multi-phase, each of an output   exceeding 75 kW but less than 149.2 kW

73

8501.62.0000

AC generators, each weighing over 250 kg   but not more than 1 metric ton and valued not over $2,400

74

8504.33.0020

Transformers designed to control horizontal   motion of electron beams in cathode-ray tubes

75

8504.90.9650

Static converter covers, bases and housings   

76

8514.90.8000

Furnace casings

77

8514.90.8000

Structural components for industrial   furnaces

78

8515.19.0000

Manually operated rework stations, including   soldering/desoldering stations

79

8515.39.0020

Machines and apparatus for arc (including   plasma arc welding, each valued not over $500

80

8525.60.1030

Hand-held transceivers (except Citizen’s Band and except low- power   radiotelephonic operating on frequencies from 49.82 MHz to 49.90 MHz, valued   not over $70 each

81

8532.10.0000

Fixed capacitors valued not over $4 per   unit

82

8532.10.0000

Fixed oil-filled capacitors rated at 1 kV   to 25 kV

83

8532.21.0050

Tantalum capacitors having a conductive polymer   cathode, valued not over $4 per unit

84

8532.21.0050

Tantalum capacitors, each measuring 7.3 mm   by 4.3 mm by 1.9 mm and valued not over $4

85

8532.22.0085

Aluminum electrolytic capacitors, each   valued not over $2.50

86

8536.41.0045

Contactors, for a voltage not exceeding 60   V and with contacts rated at or more than 10 A, each valued not over $18

87

8536.50.9025

Rotary switches, rated at over 5 A,   measuring not more than 5.5 cm by 5.0 cm by 3.4 cm, each with 2 to 8 spade   terminals and an actuator shaft with D-shaped cross section

88

8536.50.9025

Rotary switches, single pole, single throw   (SPST, rated at over 5 A, each measuring not more than 14.6 cm by 8.9 cm by   14.1 cm

89

8536.50.9031

Momentary contact switches rated at or   under 5 A, each designed for use as a motor vehicle overdrive switch

90

8536.50.9031

Momentary contact switches rated at or   under 5 A, valued not over $4 per unit

91

8536.50.9065

Rocker switches, for a voltage not   exceeding 1,000 V, designed for use in motor vehicles

92

8538.90.6000

Molded buttons

93

8538.90.6000

Molded housings and covers

94

8538.90.8120

Tanks for dead tank circuit breakers, of   aluminum

95

8543.30.9080

Aluminum anodes for use with machines and   apparatus for electroplating, electrolysis or electrophoresis

96

8543.30.9080

Chlorine generator chambers containing   titanium plates for use with machines and apparatus for electroplating,   electrolysis or electrophoresis

97

8543.30.9080

Zinc anodes for use with machines and   apparatus for electroplating, electrolysis or electrophoresis

98

9015.80.8080

Weather station sets, each consisting of a   monitoring display and outdoor weather sensors, having a transmission range   of not over 140 m and valued not over $50 per set

99

9018.12.0000

Veterinary ultrasound device with   black-and-white image quality used as a medical diagnostic tool

100

9018.90.6000

Microwave ablation antennas,whether or not   with attached controls, as parts of ablation systems used to ablate live   tumors

101

9018.90.6000

Parts and accessories of electro-surgical   instruments and appliances, other than extracorporeal shock wave   lithotripters

102

9018.90.6000

Smoke evacuation pencils with accompanying   tubing and hoses designed to integrate smoke evacuation into electrosurgery   by combining both features into a single handpiece, which is designed to   apply mono-polar electrosurgical energy to target tissue in a surgical   setting while simultaneously evacuating smoke from the surgical site

103

9018.90.6000

Suction coagulators, consisting of a   hand-piece with mechanical and/ or electrical controls and a disposable   shaft, used for the coagulation of tissue and aspiration of fluids during   surgical procedures

104

9018.90.6000

Vessel sealing and dividing devices that   use electrical energy to separate and seal tissue during open or laparoscopic   surgical procedures, consisting of a handpiece with mechanical and/or   electrical controls, and a bipolar electrode intended to deliver   electrosurgical current from a system generator directly to tissues for   cutting/ coagulation/ablation

105

9022.90.6000

Dental X-ray alignment and positioning   apparatus, each valued over $5,000

106

9022.90.6000

Multi-leaf collimators of radiotherapy   systems based on the use of X-ray

107

9022.90.6000

Overhead tube suspension used to hold and   position X-ray generating equipment

108

9027.80.4530

Instruments and apparatus that chemically   analyze food to detect the presence of gluten or peanuts, valued at less than   $55 per unit

109

9030.39.0100

Picoammeters with recording devices

110

9032.89.6070

Humidistats, each with outdoor sensor, such   humidistats valued not over $40 each